Features:

• 4-door control with individualized access rights
• Time and attendance management
• Anti-passback and duress alarms
• Real-time event logs
• Easy integration with third-party devices
• Supports multiple authentication methods including RFID, password, and biometrics

Benefits:

• Enhanced security: The INBIO 460’s access control system provides an extra layer of security by controlling who has access to your property. With individualized access rights, you can ensure that only authorized personnel can enter designated areas.
• Improved efficiency: The time and attendance management system allows you to track employee hours and monitor activity in real-time, making it easier to manage your workforce.
• Increased peace of mind: The anti-passback and duress alarms ensure that unauthorized access attempts are detected and reported, giving you peace of mind knowing your property is secure.
• Easy integration: The INBIO 460 can be easily integrated with other security systems, such as fire alarms and CCTV cameras, to provide a comprehensive security solution.

In conclusion, the INBIO 460 Multidoor Access Control System is the perfect solution for businesses, organizations, and individuals who need to secure multiple doors. With its advanced features and user-friendly interface, this system is the ideal choice for anyone looking for an efficient, reliable, and secure access control solution.

inBIO controllers can be installed easily on your network and support both TCP/IP and RS-485 communication. Support up to 3000 fingerprint templates, and 30,000 badge users and store up to 10,000 events and transactions.

Access additional control and interface.

Extra locking devices or gate controllers can be accessed.

1-door, 2-door, and 4-door models can be mixed and matched in optimized system architecture.

Anti-Passback, First-Card Opening, Multi-Card Opening, Duress Password Entry, and Auxilary input/output linkages are built into controller firmware.

The post INBIO 460: 4 DOOR MULTIDOOR ACCESS CONTROL SYSTEM appeared first on Trisul World.

HID proximity access control is a type of access control system that uses proximity cards or fobs to grant or deny entry to a specific area. The cards or fobs contain a small radio frequency (RF) chip that transmits a unique identification number to a proximity card reader. The reader then compares the identification number to a list of authorized numbers stored in its memory. If the number matches, the reader sends a signal to an access control panel, which in turn unlocks a door or gate.

HID proximity access control systems are widely used in commercial and industrial settings for controlling access to buildings, parking garages, and secure areas. They are considered a secure and convenient method of access control because the cards or fobs do not need to be inserted into a slot or swiped through a reader, and can be easily carried on a keychain or in a wallet. They can also be programmed to grant access to specific areas at specific times and can be easily updated or revoked as needed.

HID PROXPOINT PLUS 6005 – 125 KHZ MINI MULLION PROXIMITY READER

• HID’s ProxPoint Plus reader combines multiple configuration options with an attractive, inconspicuous design and economical price.
• Small-sized, low-cost reader features a beeper and multicolor LED which can be hosted and/or locally controlled.
• The potted reader is suitable for indoor or outdoor use.
• 18″ (45 cm) wire pigtail standard; consult factory for 9′ (2.7 m) pigtail available by special order.
• Classic Series covers are available in black, gray, white, or beige. Designer Series covers are available in black or gray.
• Features a beeper and multicolor LED which can be hosted and/ or locally controlled.
• Enables various beeper and LED configurations, depending on individual site requirements.
• Can read HID cards with formats up to 85 bits.

The post HID PROXIMITY CARD READER appeared first on Trisul World.

Essl FR1200, a fingerprint reader with RS485 communication interface works with biometric access controllers and fingerprint standalone access control, including inBIO series controllers, F8, and so on. It offers the function of capturing and transferring fingerprint samples to access the control panel. With its IP65-rated rugged structure, FR1200 offers extra durability in all weather conditions including outdoor environments.

• FR1200 works with the inBIO series control panel or standalone device by RS485
• IP65 certified for the outdoor working environment.
• FR1200 has a standard 125Khz ID Card module.

The F12 ESSL Fingerprint Card Reader is a biometric device used for authentication and access control. It uses fingerprint scanning technology to identify and verify a person’s identity. The device is commonly used in various industries such as financial, government, and healthcare, to ensure secure access to buildings, computers, and sensitive information.

The post ESSL FR1200 FINGERPRINT CARD READER appeared first on Trisul World.

The Essl F22 is a cutting-edge access control machine that integrates WIFI connectivity and biometric attendance tracking capabilities. This device is designed to provide a secure and efficient way to manage entry into a building or workspace.

Features:

• WIFI connectivity: The Essl F22 can be connected to a WIFI network, making it easy to remotely manage the device and access attendance records.
• Biometric attendance tracking: The device uses advanced biometric technology, such as fingerprint recognition or facial recognition, to accurately track employee attendance.
• Access control: The Essl F22 can be programmed to control access to specific areas, ensuring that only authorized personnel are allowed entry.
• Easy installation: The device is easy to install and can be set up in a matter of minutes, making it an ideal solution for businesses of all sizes.
• User-friendly interface: The Essl F22 features a user-friendly interface that allows for easy management of employee information and attendance records.

Benefits:

• Increased security: The Essl F22’s biometric technology provides a secure way to manage entry into a building or workspace, reducing the risk of unauthorized access.
• Improved efficiency: The device’s WIFI connectivity and user-friendly interface make it easy to manage employee information and attendance records, increasing efficiency and reducing manual labor.
• Cost savings: The Essl F22 eliminates the need for manual time and attendance tracking methods, reducing the costs associated with these processes.
• Easy to use: The device’s user-friendly interface and easy installation process make it an ideal solution for businesses of all sizes, regardless of technical expertise.

The Essl F22 WIFI Access Control Machine with Biometric Attendance is a reliable and cost-effective solution for businesses looking to increase security and improve efficiency. With its advanced technology and user-friendly design, this device is a must-have for any modern workplace.

ESSL F22 – FEATURES

• Fingerprint Capacity: 3000
• Card Capacity: 5000
• Finger Algorithm: Finger VX10.0
• Record Capacity: 30000
• CPU: 32-bit Microprocessor
• Coreboard: ZLM60
• Display : 2.8-inch TFT Screen
• Keypad: Yes
• LED Indicator: Green/Red
• Fingerprint sensor: 500 DPI SilkID sensor
• FAR : <=0.0001%
• FRR : <=1%
• Identification speed: <0.5 sec
• Algorithm Ver: 10
• Communication: RS232/485, TCP/IP, USB-host, Built-in Wi-Fi
• Wiegand: In & Out
• Push Data: Yes(support both static IP and domain server)
• Standard Features: work code, SMS, DLST, Self-service query, Status Switch
• DST, Automatic Status Switch, Record query, T9 input, 14-digit user ID, Anti-passback Mifare (Optional)
• Communication: RS232/485, TCP/IP, USB-host, Built-in Wi-Fi
• Wiegand: In & Out
• Push Data: Yes(support both static IP and domain server)
• Standard Features: work code, SMS, DLST, Self-service query, Status Switch
• Power Supply: DC 12V — 1.5Amp
• Operating Temperature : 0°C – 45°C
• Operating Humidity: 20% – 80%
• Dimension (in mm) : (L)158.5 x (W)78.0 x (H)19.4mm
• 2.4inch TFT color screen and Touch keys
• – Full Access Control Features: Anti-passback, access control interface for 3rd party electric lock, door sensor, exit button, alarm
• – Standard Wi-Fi
• – Network interface by TCP/IP or RS485
• – Built-in auxiliary input with enhanced flexibility to link with wired detector or emergency switch
• – Multiple Verification Modes: Multi-verification methods (card is optional) provide users with various choices
• Support exit readers: FR 1200, Push Button, KR500, Notouch, KR503
• 3rd Party Electric Lock, Door Sensor, Exit Button, Alarm
• eTimetracklite Desktop & Web
• SDK for desktop applications
• Web-based Device Manager – Bio Server Helps developers & integrators
• Supports 3rd Party Payroll/HRMS/ERP and Other applications

The post ESSL F22 WIFI ACCESS CONTROL MACHINE WITH BIOMETRIC ATTENDANCE appeared first on Trisul World.

Fingerprint biometric access control is a technology that uses an individual’s unique fingerprint pattern to verify their identity and grant or deny access to secure areas or systems. The fingerprint is scanned and compared to a previously stored template, and if a match is found, the person is granted access. This system provides a secure and convenient means of identification, as fingerprints are unique to each person and cannot be lost or forgotten like a password or card.

Reliable, durable, and highly accurate ZK fingerprint sensor with ver. 10 algorithm provides less than 1.5 seconds of user recognition. Works without a computer. Complete setup and programming can be done via keypads and embedded firmware. The graphical user interface on a 2.4-inch TFT LCD Color Screen for a rich user experience. Audio-Visual Indication for acceptance and rejection of valid/invalid fingerprints.

• Three different kinds of interface styles, including common, matrix, and magic styles
• Reliable, durable, and highly accurate ZK infrared detection fingerprint sensor with version 10.0 fingerprint algorithm
• Less than 1-second of user recognition
• Stores 3000 fingerprint templates, card capacity of 5000, and 100000 transactions
• Reads fingerprint and/or RFID cards
• Built-in Serial and Ethernet ports
• Built-in Wiegand input/output port for connection to third-party access control panels
• A built-in USB port allows for manual data transfer
• Audio-Visual indication for acceptance and rejection of valid/invalid fingers
• Tamper switch and alarm contacts

The post ESSL F18 – FINGERPRINT BIOMETRIC ACCESS CONTROL appeared first on Trisul World.

The SF100 is an IP-based fingerprint terminal that works both in network and standalone modes. In network mode, it can connect with ZKAccess3.5 software for access control and time attendance management.

Wiegand output makes SF100 flexible to connect with ZK or any 3rd party controllers as a slave reader. Additionally, Wiegand input allows two units of SF100 to configure with each other and utilize the Master & Slave solution, which requires user verification at both entrance and exit. Meanwhile, the anti-passback function can be used to maximize security.

The auxiliary input interface allows SF100 to connect with an external source, for instance, a smoke detector or emergency switch. Once the linkage function is enabled through the machine menu, the device would generate an alarm signal and open the door in case of emergency.

FEATURES

• Fingerprint Capacity 1,500
• Card Capacity (Optional) 5,000 (EM/Mifare)
• Records Capacity 80,000
• Communication TCP/IP, RS485, USB Host
• Fingerprint Sensor ZK Optical Sensor (500DPI)
• Access Control Interface Electric lock, Door sensor, Alarm, Exit button, Doorbell
• 2.4-inch color display with graphical UI for easy operation
• Up to 24 user-defined schedules that can be activated on a daily bell alert (optional)
• Prompt audio acceptance or rejection signals for valid or invalid fingers
• Compact and lightweight, Dimension(W x L x H) 90 x 90 x 34.5mm
• TCP/IP or RS485 communication for various networking environments
• Supports USB flash drive for offline data management
• Built-in auxiliary input with enhanced flexibility to link with wired detector or emergency switch
• Up to 15 multi-verification methods to enhance the security level
• Standard access control features such as Time zone, Holiday, A&C Group, Unlock combination, etc.
• Duress Alarm offers effective protection against duress by threats
• Tamper-proof switch and multiple alarm outputs
• Multi-language display available on request

The post ESSL SF100 FINGERPRINT ACCESS CONTROL appeared first on Trisul World.

X7 is one of the innovative biometric fingerprint readers for access control applications. We are offering unparalleled performance using an advanced algorithm for reliability, precision, and excellent matching speed.

It can operate in standalone mode with the interface for third-party electric lock, alarm, door sensor, exit button, and doorbell. Keypad operation is easy and convenient, such as enrolling users, deleting users,s and accessing control parameter settings, etc.

A biometric door access control system is a security system that uses biometric technology (e.g. fingerprint, face, iris recognition) to control and monitor access to a secure area. It is commonly used in commercial, industrial, and residential settings to enhance security and prevent unauthorized entry. The system typically requires individuals to present their biometric information in order to gain access and can be configured to work in conjunction with other security measures (such as passwords or security cards). The goal of a biometric door access control system is to provide a high level of security while still being convenient for authorized individuals to use.

• Access Control Device
• Stores 500 templates and 500 RFID Cards
• Reads Fingerprint and Password and card
• Operation by Admin password for device management
• Standard with ID card reader, the optional Mifare card reader
• Supports wired doorbell
• Compact and lightweight design
• Reliable, durable & highly accurate ZK optical sensor
• Less than 1-second of user recognition
• Password Capacity up to 8 groups
• Integrated 125kHz RFID proximity reader
• Small elegant design
• Audio indications for acceptance and rejection of valid/ invalid transactions
• 3rd Party Electric Lock, Alarm, Door Sensor, Exit Button, and Doorbell

The post ESSL X7 DOOR ACCESS CONTROL appeared first on Trisul World.

HID Smart Card Access Control is a type of access control system that uses smart card technology to grant or deny access to a building or area. Smart cards are plastic cards with embedded integrated circuits, which can store and process data. When a user presents a smart card to a reader, the card sends its unique identification number (ID) to the reader, which then sends the ID to the access control system for verification. If the ID is valid and the user has the proper clearance, the system will grant access.

Smart card access control systems are widely used in commercial, government, and military buildings, as well as in various other facilities that require secure access. HID Global provides a range of smart card readers and cards that are compatible with their access control systems. Additionally, HID smart card access control systems can be integrated with other building systems such as video surveillance and intrusion detection for a more comprehensive security solution.

HID R10 READER 6100 – MULLION SMART CARD READER

• iCLASS readers offer an open architecture design permitting compatibility with many of the most popular cards in the market
• Format Portability – Upgrading is completely transparent since the same Prox format and user identification numbers are brought across to your future iCLASS credentials, including HID Corporate 1000 formats.
• Secure -All RF data transmission between the card and reader is encrypted using secure algorithms. Additionally, security can be extended from the reader all the way to the Hi-O-enabled access control panel using encrypted Hi-O communication (Hi-O hardware option).
• Interoperability – iCLASS is based on international ISO interoperability standards providing compatibility with many popular card technologies (ISO15693, ISO14443A, and ISO14443B).
• Security 64-bit authentication keys are extremely secure. Readers and cards require matching keys to function.
• Key management is made easy! All cards are shipped with unique diversified keys, and readers are shipped with compatible keys.
• Elite Custom Keys Custom keys provide the highest level of security, where cards and readers are uniquely matched to individual sites or customers and are non-interchangeable.

The post HID SMART CARD READER appeared first on Trisul World.

The Mifare card reader uses radio frequency (RF) technology to communicate with the card, and it is able to read and write data to the card’s microchip. This allows for a variety of uses, including storing information such as a person’s identity, access permissions, and payment information.

One of the main benefits of Mifare card readers is their ease of use. Because they are contactless, users simply need to hold their card near the reader in order for it to work. This eliminates the need for physical contact, which can be especially helpful in situations where many people need to access a certain area quickly and efficiently.

Another benefit of Mifare card readers is their security. The cards and readers use a variety of encryption methods to protect the data stored on the card and prevent unauthorized access. This makes Mifare card readers an ideal solution for applications where security is of the utmost importance.

Mifare card readers are widely used in a variety of industries, including government, healthcare, finance, and transportation. They are also commonly used in events such as concerts, festivals, and sports games.

If you are in need of a Mifare card reader for your business or organization, there are many companies that offer these products. It’s important to do your research and choose a company that offers high-quality readers that are compatible with your specific needs. Whether you’re looking for a simple access control system or a more advanced solution for payment and identification, a Mifare card reader can provide a secure and convenient solution.

TECHNICAL SPECIFICATIONS

• KR500M: 13.56 MHz Mifare card reader
• Read Range: Up to 5CM
• Connectivity: Wiegand
• Reading Time (Card): ≤200ms
• Power / Current: DC 6-14V / Max.70mA
• Input Port: 2ea (External LED Control)
• Output Format: 26bit Wiegand (default) / 34bit Wiegand (default)
• LED Indicator: 2 Color LED Indicators(Red and Green)
• Beeper: Yes
• Operating Temperature :-20° C to +65°C
• Operating Humidity:10% to 90% relative humidity non-condensing
• Color: Black
• Dimension(WxHxT) : 116 x 75 x 17.3mm/li>
• Weight: 50g

The post KR500-M | MIFARE CARD READER appeared first on Trisul World.

KR500E is a card reader manufactured by ESSL, a company that specializes in biometric and card-based access control systems. The KR500E is a card reader that can be integrated with other access control systems to provide secure entry to buildings or restricted areas.

TECHNICAL SPECIFICATIONS

• KR500E: 125 KHz RFID card reader
• Read Range: Up to 10CM
• Connectivity: Wiegand
• Reading Time (Card): ≤200ms
• Power / Current: DC 6-14V / Max.70mA
• Input Port: 2ea (External LED Control)
• Output Format: 26bit Wiegand (default) / 34bit Wiegand (default)
• LED Indicator: 2 Color LED Indicators(Red and Green)
• Beeper: Yes
• Operating Temperature :-20° C to +65°C
• Operating Humidity:10% to 90% relative humidity non-condensing
• Color: Black
• Dimension(WxHxT) : 116 x 75 x 17.3mm
• Weight: 50g

The post KR500-E | RFID PROXIMITY CARD READER appeared first on Trisul World.